2011 Dodge Sport Cars Charger Mopar

2011 Dodge Sport Cars Charger Mopar

The Charger redline bring 2011 version of the popular vehicle lower to the ground with a suspension that lowers the car an inch. Chrysler Group LLC's Mopar Division will launch a limited-edition Dodge Charger outfitted with select high-performance parts and appearance items straight from the Mopar parts catalog, to built on the success of 2010 Dodge Challenger Mopar.

2011 Dodge Sport Cars Charger Mopar

A sports car from Chrysler is back, this time present in the arena of the 2011 New York Auto Show is the 2011 Dodge Sport Cars Charger Mopar. With power and good performance, 2011 Mopar Dodge Charger ’11 to give you a different sensation when the highways since 2011 Dodge Sport Cars Charger Mopar has the look of the mysterious and ferocious.

"The 2011 Dodge Sport Cars Charger Mopar '11 Charger takes the 'head- turning' factor up a few notches," said Pietro Gorlier, President and CEO of Mopar, Chrysler Group's service, parts and customer-care brand. "By adding some of the most distinctive accessories to an already strong performer, we've created a special-edition car for enthusiasts."

2011 Dodge Sport Cars Charger Mopar

Like the Dodge Charger R/T, the 2011 Dodge Sport Cars Charger Mopar also uses a machine with a capacity large enough so that the 2011 Dodge Sport Cars Charger Mopar’11 uses powered  5.7-liter HEMI®  V8 capable of producing power at 370 hp with 395 lb-ft of torque, the specially equipped Charger includes the "Super Trac Pac" option that pushes the capabilities of the Dodge Charger Mopar in acceleration, handling and braking. Already powerful, the 5.7-liter has been tuned to extract the maximum amount of torque from the engine with the inclusion of a specially calibrated engine controller. The controller matches maximum engine power and transmission shifting to the differential for the 2011 Dodge Sport Cars Charger Mopar. While the 2011 Dodge Sport Cars Charger Mopar’11 transmission used is 5-speed automatic transmission with Auto Stick feature, so with the Auto Stick feature, the driver can select a higher gear or lower and the transmission controller which can help prevent the possibility of over-rev condition in 2011 Dodge Mopar Charger.

2011 Dodge Sport Cars Charger Mopar

While the 2011 Dodge Sport Cars Charger Mopar’11 has a fairly rapid acceleration of being able to travel 0-60 mph less than 5 seconds. 2011 Dodge Mopar Charger ’11 has a three stage stability control, standard tune and sporty suspension that can give you comfort when using the 2011 Dodge Sport Cars Charger Mopar’11 on the road. Enhancements to the chassis include adding larger front 30mm solid stabilizer bar and rear 20mm solid stabilizer bar, increases from 27mm and 16mm (respectively). Adding to the overall stability and handling of the 2011 Dodge Sport Cars Charger Mopar are cross-car braces located at both the front and rear shock towers. For increased luggage space, the rear tower-to-tower brace may be easily removed.

2011 Dodge Sport Cars Charger Mopar

Specific-design, 20-inch x 8-inch Envy wheels are fitted with Goodyear F1 Supercar 245/45ZR20 tires at all four corners. Wheels are a five-spoke design with a 45mm offset, include specific Mopar center caps and are finished in a high-gloss black complementing the overall "Pitch Black" exterior finish of the 2011 Dodge Sport Cars Charger Mopar.

2011 Dodge Sport Cars Charger Mopar

The interior boasts Katzkin leather seats, metallic trim and a strange shifter. There are also alloy pedals, 2011 Dodge Sport Cars Charger Mopar floor mats and an individually-numbered plaque. The suspension is also revised. It features bigger stabilizer bars (30 mm at the front and 20mm at the rear) and strut tower braces Mopar also installed a high performance braking system with enormous calipers and discs behind the 20” wheels. Excellent stopping power is provided through vented rotors measuring 345mm x 28mm up front that are fitted with dual-piston, sliding calipers. At the rear, vented rotors measuring 320mm x 22mm, coupled with single-piston calipers are used.

2011 Dodge Sport Cars Charger Mopar is available in a choice of colors Pitch Black, interior Mopar Dodge Charger ’11 is also the same as the color of the exterior so that the 2011 Dodge Charger Mopar ’11 is really very mysterious and very suitable for those who like to be a hidden strength. A pair of blue lines also give the impression of a different race. The blue line in 2011 Dodge Sport Cars Charger Mopar is from front to back, not only exterior but the interior 2011 Dodge Sport Cars Charger Mopar’11 also has a blue line.

2011 Dodge Sport Cars Charger Mopar’11 will be built in Brampton, Ontario and settled in central upfit in Windsor, Ontario. 2011 Dodge Sport Cars Charger Mopar’11 will be produced as many as 1000 units, 900 units will be provided to the United States, while 100 units for Canada. 2011 Dodge Sport Cars Charger Mopar’11 will be sold with prices starting at $ 39,750 and for ordering will be available starting on 18 April while the Dodge Mopar Charger ’11 shipments will begin in late summer.

2011 Dodge Sport Cars Charger Mopar

Customers who purchase a 2011 Dodge Sport Cars Charger Mopar will receive a personalized owner kit in a customized Mopar '11 box. The kit will include a certificate with the vehicle identification number (VIN), exact date of manufacture and the number of the vehicle. The kit will also include a brochure that highlights the unique features of the vehicle, exclusive Mopar '11 merchandise.

SAAB Spyker 9+ Tribute - SAAB Supercar

Paying his tribute to the SAAB Spyker Automobiles, Swedish designer Eduard Gray has come up with a vehicle concept called the “SAAB Spyker 9+ Tribute” that is not only pleasant to watch but to drive as well. Combining the elements of a mid-engined SAAB with the Spyker platform, the new supercar featuring low down aerodynamics will possibly generate power from an Audi-sourced V8 engine. Touting a big windshield that extends to complete the roof, the Saab Spyker 9+ Tribute allows a wider view to the commuters. His long, lean two-door Saab Spyker 9+ concept car imagines an evolution of Saab's Aero-X enhanced by some of Spyker's exoticism.

SAAB Spyker 9+ Tribute

The ink is barely dry on Dutch supercar marque Spyker’s deal to buy Saab, but speculation as to what sort of alluring automotive offspring might arise from the union has already begun. Eduard Gray, an industrial designer educated at Coventry University in the UK and now based in Trollhättan, Sweden, has come up with a concrete vision.

SAAB Spyker 9+ Tribute

The union of Saab and Spyker presents a unique opportunity to create a design that takes the best of each brand and distills their qualities into a single product," he said. Gray, who is Dutch and English, points out that a truly unique car can be assembled with the low-slung mid-engine Spyker supercar chassis and the design language at Saab. Spyker lends us its supercar chassis with a mid-mounted engine and low down aerodynamics while Saab contributes with the style, character and engineering making for a design that is as pleasant to look at as it is to drive.

SAAB Spyker 9+ Tribute

Indeed, his six drawings of the Saab Spyker 9+ Tribute shows elements of both companies. Gray calls the work "a quick expression of my optimism for the future of the brand."

SAAB Spyker 9+ Tribute

The distinctly Scandinavian design features a Spyker chassis with a mid-mounted engine and low down aerodynamics, including a system to reduce friction in straight line driving whilst increasing traction in cornering and braking. An enormous panoramic glass roof gives it something of a targa feel as well. Envisioned as a 2+2 model in the storied GT tradition, engine-wise it’s speculated to house a V6 bi-turbo capable of producing over 600 hp, perhaps powered purely by ethanol – we’re talking about the future after all.

2010 Audi Cars Q7 S-Line by JE DESIGN

JE DEsign lends the Audi Q7 S-Line greater width and an awesome looking stance. The styling kit includes head lamps lens caps, which lend the car a more aggressive look. Fitting the impressive front spoiler edges helps to reduce lift. It can also lend Q7 S-line greater prestige when overtaking. Top quality, innovative engineering and a elegant design are the features of this exclusive SUV wheel. The wheel is especially made for the heavy SUV of the Volkswagen group like the Porsche Cayenne, Audi Q7 and VW Touareg.

press release :

True to the motto of “everything or nothing”, the car styling specialist from Leingarten, Germany, customizes the Q7 s-Line to create an impressive car. In addition to the muscular wide body kit, which makes this Audi look even more powerful, JE DESIGN is also offering a performance enhancement, new rims and an electronically lowered suspension.

JE DESIGN enhances the appearance of the rear end by equipping the Q7 S-Line with a new tailgate skirt attachment, which incorporates diamond-shaped openings on the right and left. In each of these openings belongs a JE DESIGN dual tailpipe from made permanently shiny, corrosion-resistant stainless steel.

The upper part of the rear end is also spectacular, which JE DESIGN adorns with a wing spoiler tail fin including a C-pillar trim. A feature that is sure to get heads turning. The same also applies to the JE DESIGN fender flare kit “WIDE BODY”, for which matching door panels are also available. In front of the rear fenders, air inlets lend the car a sportier look, without appearing “plump”. JE DESIGN is offering the muscular look as a complete body-styling kit which is cheaper than buying all single parts piece by piece.

Top quality, innovative engineering and a elegant design are the features of this exclusive SUV-wheel. The wheel is especially made for the heavy SUVs of the Volkswagen group like the Porsche Cayenne, Audi Q7 and VW Touareg. The fine figure of the JE DESIGN Q7 S-Line is rounded off by an electronically lowered suspension, which the car customizer from Leingarten offers for cars with air suspension and which finally helps the JE DESIGN Q7 to morph into a true racing SUV. Lowering for cars with standard suspension is also available and of course JE DESIGN offers for almost all engine versions a power upgrade kit.

2010 Audi Cars Q7 S-Line by JE DESIGN

JE DEsign lends the Audi Q7 S-Line greater width and an awesome looking stance. The styling kit includes head lamps lens caps, which lend the car a more aggressive look. Fitting the impressive front spoiler edges helps to reduce lift. It can also lend Q7 S-line greater prestige when overtaking. Top quality, innovative engineering and a elegant design are the features of this exclusive SUV wheel. The wheel is especially made for the heavy SUV of the Volkswagen group like the Porsche Cayenne, Audi Q7 and VW Touareg.

press release :

True to the motto of “everything or nothing”, the car styling specialist from Leingarten, Germany, customizes the Q7 s-Line to create an impressive car. In addition to the muscular wide body kit, which makes this Audi look even more powerful, JE DESIGN is also offering a performance enhancement, new rims and an electronically lowered suspension.

JE DESIGN enhances the appearance of the rear end by equipping the Q7 S-Line with a new tailgate skirt attachment, which incorporates diamond-shaped openings on the right and left. In each of these openings belongs a JE DESIGN dual tailpipe from made permanently shiny, corrosion-resistant stainless steel.

The upper part of the rear end is also spectacular, which JE DESIGN adorns with a wing spoiler tail fin including a C-pillar trim. A feature that is sure to get heads turning. The same also applies to the JE DESIGN fender flare kit “WIDE BODY”, for which matching door panels are also available. In front of the rear fenders, air inlets lend the car a sportier look, without appearing “plump”. JE DESIGN is offering the muscular look as a complete body-styling kit which is cheaper than buying all single parts piece by piece.

Top quality, innovative engineering and a elegant design are the features of this exclusive SUV-wheel. The wheel is especially made for the heavy SUVs of the Volkswagen group like the Porsche Cayenne, Audi Q7 and VW Touareg. The fine figure of the JE DESIGN Q7 S-Line is rounded off by an electronically lowered suspension, which the car customizer from Leingarten offers for cars with air suspension and which finally helps the JE DESIGN Q7 to morph into a true racing SUV. Lowering for cars with standard suspension is also available and of course JE DESIGN offers for almost all engine versions a power upgrade kit.

2010 Daihatsu Design Cars Materia by Inden-Design

The company is now branching out a bit, and turning their sites on the sub-€15,000 Daihatsu Materia. German tuners Inden-Design is better known for their work on high-priced models from Ferrari and Mercedes. Dubbed the "Icecube," the bright white box has been outfitted with a host of new items. On the exterior, the new body kit contains four different extensions that can be attached over the current panels, as well as a daytime lights, and a new rear bumper with diffuser. Triangle-shaped side mirrors and carbon fiber door handles and boot cover are also installed.

The Inden-Design Tuner has modified the new ICECUBE cars both from optical and from the technical point of view at the same time. This resulted in the creation of the rough look. The Daihatsu ICECUBE Materia creates a convincing outfit by innovative design and exemplary functionality at a car tuning level. The whole kit consists of an extension set (four extensions (of 10 parts) for 448,00 Euro without mounting and putting at the vehicle), a rear bumper with diffuser (448 Euro) and the standard front bumper fascia equipments with day drive lights (230 Euro) in the front turn signal housing. Further identification features are triangular mirrors outside, door handles and a boot lid cover of real carbon (1,200 Euro for the set).

The rear and has been equipped with high-grade steel exhaust system and a catalyst converter with two polished end pipes for 1,198 Euro, which produce the corresponding sound for the optics. The car handling of the ICECUBE becomes with H&R sport helical differential gear (780 Euro) even more sporty. due to the sport differential gear, maximum traction at all road conditions and therefore, of course an optimal behavior on the road will also be reached.

In addition, the rear end has been equipped with high-grade steel exhaust system and a catalyst converter with two polished end pipes for 1,198 Euro, which produce the corresponding sound for the optics. The car handling of the „ICECUBE" becomes with H&R-sport helical differential gear (780 Euro) even more sporty. Due to the sport differential gear, maximum traction at all road conditions and therefore, of course, an optimal behavior on the road will also be reached. 

But something has been positively changed from within as well. Many options in the interior like triangular mirrors, the central console, the door switch covering, the entrances and the B-column with real carbon in silver (1,450 Euro) are just some of a lot of features, making the life in the ICECUBE sportier. In addition, the speedometer shaft, the A-column and the door armrest have been trimmed with alcantara (680 Euro). There is also a high-quality loudspeaker system (1,200 Euro) with high frequency loudspeaker on front and rear doors - finally, a Phillips DVD-monitor incl. navigation system (1,298 Euro) demonstrates that this baby knows what`s what. The sporty pretensions are connected here with individuality, without discarding ordinariness at the same time.

Finally, moving to the interior you will find a new central console, door switch covering, and the entrances around the B-column lined with real carbon fiber in a silver color. Along with all theses improvements, owners of the Daihatsu Materia can order the speedometer shaft, alcantara trimmed door armrests, a high quality loudspeaker system, and lastly a Phillips DVD monitor system including navigation. The complete package from Inden-Design for the Daihatsu Materia ICECUBE costs 19,784 euros.

2011 BMW 5-Series F10 Sports Concept plans by Lumma Design, TopCar, and Cardi that have joined forces to offer a new Sport package

2011 BMW 5-Series F10 Sports Concept plans

Two Russian tuning firms and a German company have teamed up to offer a new kit for the 2011 BMW 5-Series F10. TopCar and Cardi, from Russia, and Lumma Design have joined forces to create an aggressive styling package which will likely boost performance.

The brand-new 2011 BMW 5-Series hasn't even made its motor show debut yet, but tuners are already actively working on their plans to present an array of performance and cosmetic goodies for the Bavarian automaker's premium sedan.

2011 BMW 5-Series F10 Sports Concept plans

German and Russian tuning houses are joining efforts to create bodykit and tuning packages for the F10 5-series. Full set of renderings inside. One of the first proposalscomes from a trio of companies, Russia's TopCar and Cardi, and Germany's Lumma Design, that have joined forces to offer a new sport package for the Bimmer.

2011 BMW 5-Series F10 Sports Concept plans

TopCar and Cardi are the russian tuners and Lumma Design is the german tuner. Judging by the included renderings, the car will maintain a bulging nose, with new carbon fiber front lip installed underneath. Their renderings show an aggressive front end package including a new front bumper aggressively sculpted with huge air inlets, carbon fiber front lip, LED lighting and honeycomb grill. TopCar and Cardi will handle the design aspect of the project while Lumma Design will be responsible for the manufacturing of the kit as well as the performance upgrades. One version of the kit also features super wide wheel fenders and aggressive side skirts. The rear features a carbon fiber rear trunk spoiler, together with carbon fiber rear diffuser, quad exhaust pipes. Two types of wheel options will be available.

2011 BMW 5-Series F10 Sports Concept plans

Although the three tuners have not disclosed any specific details about the package, they did release a set of photoshoped images that show a new wide bodykit trimmed in carbon fiber that consists of new bumpers, fender extensions, side skirts and a boot lid spoiler.2011 BMW 5-Series F10 Sports Concept plans

In addition, the tuners previewed three different alloy wheel designs for the 2011 5-Series.
This custom F10 5-series is expected to debut in April 2010, along with details of the full performance tuning package.

2011 BMW 5-Series F10 Sports Concept plans by Lumma Design, TopCar, and Cardi that have joined forces to offer a new Sport package

2011 BMW 5-Series F10 Sports Concept plans

Two Russian tuning firms and a German company have teamed up to offer a new kit for the 2011 BMW 5-Series F10. TopCar and Cardi, from Russia, and Lumma Design have joined forces to create an aggressive styling package which will likely boost performance.

The brand-new 2011 BMW 5-Series hasn't even made its motor show debut yet, but tuners are already actively working on their plans to present an array of performance and cosmetic goodies for the Bavarian automaker's premium sedan.

2011 BMW 5-Series F10 Sports Concept plans

German and Russian tuning houses are joining efforts to create bodykit and tuning packages for the F10 5-series. Full set of renderings inside. One of the first proposalscomes from a trio of companies, Russia's TopCar and Cardi, and Germany's Lumma Design, that have joined forces to offer a new sport package for the Bimmer.

2011 BMW 5-Series F10 Sports Concept plans

TopCar and Cardi are the russian tuners and Lumma Design is the german tuner. Judging by the included renderings, the car will maintain a bulging nose, with new carbon fiber front lip installed underneath. Their renderings show an aggressive front end package including a new front bumper aggressively sculpted with huge air inlets, carbon fiber front lip, LED lighting and honeycomb grill. TopCar and Cardi will handle the design aspect of the project while Lumma Design will be responsible for the manufacturing of the kit as well as the performance upgrades. One version of the kit also features super wide wheel fenders and aggressive side skirts. The rear features a carbon fiber rear trunk spoiler, together with carbon fiber rear diffuser, quad exhaust pipes. Two types of wheel options will be available.

2011 BMW 5-Series F10 Sports Concept plans

Although the three tuners have not disclosed any specific details about the package, they did release a set of photoshoped images that show a new wide bodykit trimmed in carbon fiber that consists of new bumpers, fender extensions, side skirts and a boot lid spoiler.2011 BMW 5-Series F10 Sports Concept plans

In addition, the tuners previewed three different alloy wheel designs for the 2011 5-Series.
This custom F10 5-series is expected to debut in April 2010, along with details of the full performance tuning package.

2011 BMW 5-Series F10 Sports Concept plans by Lumma Design, TopCar, and Cardi that have joined forces to offer a new Sport package

2011 BMW 5-Series F10 Sports Concept plans

Two Russian tuning firms and a German company have teamed up to offer a new kit for the 2011 BMW 5-Series F10. TopCar and Cardi, from Russia, and Lumma Design have joined forces to create an aggressive styling package which will likely boost performance.

The brand-new 2011 BMW 5-Series hasn't even made its motor show debut yet, but tuners are already actively working on their plans to present an array of performance and cosmetic goodies for the Bavarian automaker's premium sedan.

2011 BMW 5-Series F10 Sports Concept plans

German and Russian tuning houses are joining efforts to create bodykit and tuning packages for the F10 5-series. Full set of renderings inside. One of the first proposalscomes from a trio of companies, Russia's TopCar and Cardi, and Germany's Lumma Design, that have joined forces to offer a new sport package for the Bimmer.

2011 BMW 5-Series F10 Sports Concept plans

TopCar and Cardi are the russian tuners and Lumma Design is the german tuner. Judging by the included renderings, the car will maintain a bulging nose, with new carbon fiber front lip installed underneath. Their renderings show an aggressive front end package including a new front bumper aggressively sculpted with huge air inlets, carbon fiber front lip, LED lighting and honeycomb grill. TopCar and Cardi will handle the design aspect of the project while Lumma Design will be responsible for the manufacturing of the kit as well as the performance upgrades. One version of the kit also features super wide wheel fenders and aggressive side skirts. The rear features a carbon fiber rear trunk spoiler, together with carbon fiber rear diffuser, quad exhaust pipes. Two types of wheel options will be available.

2011 BMW 5-Series F10 Sports Concept plans

Although the three tuners have not disclosed any specific details about the package, they did release a set of photoshoped images that show a new wide bodykit trimmed in carbon fiber that consists of new bumpers, fender extensions, side skirts and a boot lid spoiler.2011 BMW 5-Series F10 Sports Concept plans

In addition, the tuners previewed three different alloy wheel designs for the 2011 5-Series.
This custom F10 5-series is expected to debut in April 2010, along with details of the full performance tuning package.

2009 Audi Avatar concept Car is an electric powered supercar concept

2009 Audi Avatar concept Car

The Audi Avatar is a concept vehicle which was created by Edwin Conan (Yi Yuan), a graduate of RMIT (Royal Melbourne Institute of Technology) University in Australia. The Avatar was developed during Edwin's final year at the university as part of his degree project.

The Avatar is an electric powered supercar concept which is designed for about 20-25 years in the future. The shape was inspired by the 1937 Auto Union Type C Streamline racing car, and both cars - even though they are separated by a century - share the same clinical lines and pronounced wheel arches.

2009 Audi Avatar concept Car

There are no conventional doors to the Avatar, instead the vehicle utilizes a three-part canopy which opens upward to provide entry and exit. The main canopy opens forward together with the steering wheel and the dashboard, while two smaller canopies above the passenger seats open backwards. At the same time a panel in the bodywork drops down to act as a step.

2009 Audi Avatar concept Car

The interior of the Audi Avatar features a three-seat layout with the driver sitting in a central position forward of the passenger seats. The driver is met with a futuristic dashboard which consists of a transparent LCD display which provides all essential driving data. In the center of the steering wheel is another screen which provides navigation information. Additional information can also be projected onto the canopy to provide a heads-up-display similar to those found in high performance aircraft.

Thanks to a drive-by-wire system the Avatar's steering wheel can be swapped out quickly and easily in favor of a joystick or even a keypad depending on driver preferences.

2009 Audi Avatar concept Car

Powering the Audi Avatar is an all-electric drivetrain which comprises of four individual electric motors (one for each wheel), and a pair of high-performance battery packs. The battery packs are split in two to provide better weight distribution, one is located at the front and one at the rear. In total the projected output is 544 horsepower, and 4,500 Nm (3,319 lb-ft) of torque. This gives the car a theoretical top speed of 223 mph (360 Km/h), and a 0-62 mph (100 km/h) time of 2.9 seconds.

2009 Audi Avatar concept Car

The wheels of the Avatar are housed inside the car's four 'legs'. The legs are constructed from a deformable material which allows it to change shape when the wheel is turned. To increase the vehicle's agility and handling, the Avatar features a four-wheel-steering system. The front wheels provide most of the steering, while the rear wheels can turn up to 10 degrees.