Hyundai i30 1.6 CRDi Automatic 2007 May 22nd, 2011admin
Hyundai i30 1.6 CRDi Automatic is a 5-door, front wheel drive (FWD) hatchback with 5 seats. It has been unveiled in 2007. The automobile is 1480.00 mm high, 4245.00 mm long and 1775.00 mm wide. In addition, the lengths of the rear and front track of this model are 1544.00 mm and 1546.00 mm respectively and its wheelbase is 2650.00 mm. The engine of Hyundai i30 1.6 CRDi Automatic is turbocharged and has 4 cylinders with 4 valves per cylinder, engine displacement of 1582 cc and double overhead camshaft (DOHC).
The rating of CO2 emissions is 155 g/km. The vehicle has a power assisted rack and pinion steering system. The front suspension includes anti-roll bar, coil springs, independent, MacPherson strut and the rear suspension – anti-roll bar, coil springs, independent, multi-link. The front wheels size is 5.5J x 15. The rear wheels size is 5.5J x 15. The size/type of tyres in the front is 185/65 R 15. The size/type of the rear tyres is 185/65 R 15. The front brakes have with ventilated disks. The rear brakes are set up with disks, servo assistance, anti-lock braking system (ABS). The rear brakes diameter is 262.00 mm and the front brakes one is 280.00 mm.The compression ratio is 17.30:1. The maximum torque and maximum power delivered by the engine are 255 Nm at 1900-2750 rpm and 85 kW / 116 ps at 4000 rpm respectively. The fuel system of this model is common rail. The oiling system of the engine is wet sump. From 0 to 100 km/h the vehicle can accelerate for 12.80 s. This model has a 0.329 drag coefficient. The Hyundai i30 1.6 CRDi Automatic has a 4-speed automatic transmission. The extra urban fuel consumption of this automobile is 4.9 l/100 km, the urban fuel consumption is 7.6 l/100 km and the combined is 5.9 l/100 km . 53.0 l is the capacity of the fuel tank.
It is fitted in the front of the vehicle and has a transverse alignment. Its cylinders are inline-arranged. The length of the piston stroke is 84.50 mm and the diameter of the cylinders is 77.20 mm . 